If you’re searching for a technique to root your Samsung Galaxy Tab 2 7.0 Wi-Fi GT-P3110, you’re in luck-we have now a step-by-step guide on easy methods to root your Android tablet. XDA Developers senior member nycbjr managed to create a rooting technique to your Android tablet. This rooting guide helps you to root your tablet in two totally different technique: via Heimdall or ClockworkMod Recovery.
Similar to Odin, Heimdall is designed to flash firmware on Galaxy S phones. The tool additionally works on different Android gadgets such as Samsung Captivate, Samsung Fascinate, Samsung Galaxy S2, Samsung Epic 4G, Samsung Galaxy Tab, and lots of more. What’s more is that the tool is a cross-platform opensource tool and you need to use it on your Linux, Mac, and Windows PC.Other than flashing ROMs, Heimdall can even flash kernels that assist you to root your tablet. You may also use the ClockworkMod Recovery tool to flash a rooting package and simply root your tablet.
If you’re itching to gain root access in your Android tablet, read on to discover ways to root your Samsung Galaxy Tab 2 7.0 GT-P3110 through Heimdall or ClockworkMod Recovery.
Warning
- Applying these instructions on another device or model may produce undesired outcomes.
- The instructions in this guide are intended for use with the Samsung Galaxy Tab 2 7.0 Wi-Fi GT-P3110
- There is no guarantee that these instructions will work under your specific and unique circumstances.
- The information in this guide is provided for instructional and educational purposes only.
- We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
- Use these instructions at your own risk.
- Read and understand the whole guide first before actually performing the instructions.
Requirements
- A Samsung Galaxy Tab 2 7.0 GT-P3110
- For Windows users, you will need to download the USB drivers on your computer. You can get the drivers by installing Samsung Kies on your computer. Make sure to close Samsung Kies before following the procedures below.
- Download and install Android Software Development Kit (SDK) on your computer. You can also install Android Debug Bridge (ADB) via Android SDK.
- Refer to our guides about how to install Android SDK and how to use ADB.
- Disable system tools such as anti-virus software, firewall programs, and Samsung KIES to avoid any interruptions throughout the procedure.
- Backup all personal data on your tablet to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
- For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
- Charge your tablet’s battery to 75% or more. This will ensure that your tablet has sufficient power throughout the entire procedure.
Instructions
Heimdall Method
- Download and install Heimdall Frontend to your computer.
- For Windows users, download and install the Heimdall Suite 1.3.2 (Binaries) (heimdall-suite-1.3.2-win32.zip, 9.6 MB). This will install the Heimdall command line tool, Heimdall Frontend, and drivers. You also need Microsoft Visual C++ 2010 installed on your computer to use this tool.
- For OS X 10.4+ (Universal – x86/AMD64/Intel 64) users, download and install the Heimdall Suite 1.3.2 (Binaries) (heimdall-suite-1.3.2-mac.dmg, 12.4 MB). This will install Heimdall command line tool, Heimdall Frontend, and drivers (Codeless kext) on your computer.
- For Debian Linux (i386/x86) users, download and install Heimdall Frontend 1.3.2 (Binary) (heimdall-frontend_1.3.2_i386.deb, 91.4 kB). You will also need to install the Heimdall 1.3.2 – Command Line (binary) (heimdall_1.3.2_i386.deb, 41.4 kB) for you to use Heimdall Frontend.
- Download gt-p3110.pit here or here(4.1 kB).
- NOTE: If you have downloaded gt-p3110.pit.txt, rename the file into gt-p3110.pit.
- Download boot-bjr.img here or here (5.38 MB).
- Switch off your tablet.
- Reboot your Samsung Galaxy Tab 2 7.0 GT-P3110 into Download Mode. You can do that by pressing and holding the Volume Up key (right key on the Volume rocker) and Power button. When a warning message appears, press the Volume Down key (left key on the Volume rocker) to continue.
- NOTE: To avoid confusion, the Left Volume key is the button nearest to the Power button. On the other hand, the Right Volume key is the button farthest from the Power button.
- Open Heimdall Frontend on your computer.
- Connect your tablet to the computer via USB cable.
- To check if your tablet has successfully connected to the computer, go to the Utilities tab in Heimdall. Click the Detect button and the message “Device detected” will appear in the message box at the bottom.
- Go to the Flash tab.
- Under Options, go to “PIT” and attach the gt-p3110.pit file.
- Under Partitions (Files), click the Add button.
- Under Partition Details, select Kernel as “Partition Name” and attach boot-bjr.img. Your Heimdall Frontend should look like this:
- Once everything is set, click the Start in Heimdall to begin. Your tablet will automatically reboot.
- After the tablet reboots, open a command prompt or terminal and type the following commands:
adb shell./su./gtab2-root.sh
ClockworkMod Recovery Method
- Download the ClockworkMod Recovery image (recovery.tar.md5, 5.3 MB).
- Download the root package (cwm-root-gtab2.zip, 1.22 MB).
- Download Odin3 v1.85 (Odin3-v1.85_3.zip, 199 kB).
- Extract Odin3-v1.85_3.zip into a folder on your computer.
- Go to the extracted folder and double-click Odin3 v1.85.exe to launch Odin on your computer.
- Copy cwm-root-gtab2.zip to the root of your tablet’s external SD card.
- Switch off your tablet.
- Reboot your tablet into Download Mode. You can do that by pressing and holding the Volume Up key (right key on the Volume rocker) and Power button. When a warning message appears, press the Volume Down key (left key on the Volume rocker) to continue.
- Connect your tablet to the computer via the USB cable. The word “Added” will appear in Odin. If it doesn’t appear, make sure you have properly installed the USB drivers on your computer.
- Click the PDA button in Odin and choose the recovery.tar.md5file.
- NOTE: Do not make unnecessary changes in Odin. Doing so will likely brick your tablet.
- Once all are set, click the Start button in Odin.
- Your tablet will automatically reboot. You will also get the “Pass” message in Odin.
- Turn off your tablet.
- Reboot your tablet into ClockworkMod Recovery mode by pressing and holding the Volume Down key (left key on the Volume rocker) and Power button. When the Samsung logo appears, release the Power button but keep the Volume key pressed.
- NOTE: Once in recovery, use the Volume keys to navigate and the Power button to select an option.
- Select Install ZIP From SD Card and choose the cwm-root-gtab2.zip file. Confirm the action on the next screen to initiate the rooting process.
- Once complete, go back to the main menu and select Reboot System Now.
Your Samsung Galaxy Tab 2 7.0 Wi-Fi GT-P3110 has been successfully rooted via the Heimdall or ClockworkMod Recovery method.
0 comments:
Post a Comment